FINAT FTM 9

Metóda skúšky priľnavosti slučky

The metóda skúšky priľnavosti slučky, standardized as FINAT FTM 9, is a crucial procedure for evaluating the tackiness of pressure-sensitive adhesives (PSAs). Tack is one of the most vital properties of adhesives, particularly for applications involving labeling, tapes, and packaging materials. This test helps manufacturers and quality control professionals determine the adhesive’s initial grab, making it especially valuable in industries where fast adhesion is required.

Získať cenovú ponuku

What Is Loop Tack?

Loop tack refers to the force required to separate a loop of adhesive-coated material from a standard surface at a controlled speed. The test results indicate the ability of an adhesive to create an immediate bond with a substrate.

Test Procedure for FINAT FTM 9

Test Equipment and Conditions

To ensure reliable and repeatable results, the test is conducted using a slučkový tester lepivosti with a vertical jaw separation rate of 300 mm per minute and an accuracy of ±2%. The standard surface used is a float glass plate, ensuring a uniform testing environment. The test is performed under controlled conditions of 23°C ± 2°C and 50% RH ± 5% RH to eliminate environmental influences.

https://youtu.be/L1HbDnq-LxQ?si=oIHFA1JJg1W6T1Kl

Step-by-Step Loop Tack Test Process

1. Príprava vzorky: A strip of adhesive-coated material (25mm wide, 175mm long) is cut from the test sample.
2. Formovanie slučky: The strip is formed into a loop with the adhesive facing outward and clamped into the upper jaw of the tensile tester.
3. Contact with Glass Plate: The loop is brought into contact with the glass plate at 300 mm per minute.
4. Separation Measurement: The machine immediately reverses direction to measure the force required to separate the loop from the glass surface.
5. Zaznamenávanie výsledkov: The peak force (loop tack value) is recorded in Newtons. If paper tearing (PT) or adhesive transfer (AT) occurs, it is noted in the results.

Factors Influencing Loop Tack Test Results

Several variables can affect the slučkový test lepivosti outcome:

• Adhesive Composition: Different adhesives exhibit varying tack properties.
• Backing Material Rigidity: Stiff materials may alter test results.
• Surface Cleanliness: The glass plate must be free from contaminants like grease or dust.
• Podmienky testovania: Variations in temperature and humidity can impact adhesion behavior.

Why Traditional Methods Fall Short？

While older methods like the roll ball test (GB/T 4852-2002) are still used, they suffer from inconsistencies due to manual handling and environmental variables. The slučkový test lepivosti eliminates these issues by standardizing speed, pressure, and contact area, making it the preferred choice for global compliance.

Výber správneho testera slučiek

For precise and repeatable loop tack testing,. LTT-01 Tester priľnavosti slučky podľa Cell Instruments is an ideal solution. This advanced instrument offers:

• 7-inch touch screen pre intuitívne ovládanie.
• Riadiaci systém PLC for accurate and repeatable results.
• Adjustable speed and stroke settings to meet various test requirements.
• Microprinter and RS232 port for efficient data output and analysis.
• Súlad s FINAT FTM 9, PSTC-16, and ASTM D6195 štandardy.

Kontaktujte nás Získajte riešenie na testovanie slučiek

FINAT FTM 9 is a fundamental standard for evaluating lepidlá citlivé na tlak pomocou metóda skúšky priľnavosti slučky. Dodržiavaním správnych postupov a používaním slučkový tester lepivosti, môžu výrobcovia zabezpečiť vysokokvalitný lepiaci výkon. Pre pokročilé testovacie riešenia, Tester slučiek Cell Instruments' je špičkovou voľbou v odvetví.

často kladené otázky

1. Why is the loop tack test important?

The loop tack test determines the initial adhesive strength of pressure-sensitive materials, crucial for labels, tapes, and packaging applications.

2. What factors affect loop tack results?

Variables such as adhesive formulation, backing material rigidity, surface cleanliness, and environmental conditions impact test outcomes.

3. What standards does the LTT-01 Loop Tack Tester comply with?

It meets FINAT FTM 9, PSTC-16, and ASTM D6195 standards for loop tack testing.

4. What industries use loop tack testing?

Industries including packaging, medical tapes, automotive, and electronics rely on loop tack testing for quality control.