Loop Tack Test Method for Pressure-Sensitive Adhesives

Testing Method

In the world of pressure-sensitive adhesives (PSAs), tack is the initial grab that allows a label, tape, or sticker to adhere upon brief contact. The loop tack test method has become a standardized and efficient way to quantify this critical performance property. This article offers a comprehensive guide on how to conduct loop tack testing in accordance with PSTC-16, ASTM D6195, va FINAT FTM 9, and introduces the Cell Instruments LTT-01 Loop Tack Tester—an ideal tool for quality control and R&D environments.

loop tack test method
LTT-01 pastadirni tekshirgich

Understanding the Importance of Loop Tack Testing

The loop tack test method is widely recognized for evaluating the adhesive’s ability to form an immediate bond with a surface under minimal pressure. Unlike peel or shear tests that measure long-term bond strength, loop tack focuses on initial adhesion, making it particularly valuable for fast-moving applications such as automatic labeling, medical tapes, and temporary bonding.

Key applications include:

  • Quality control in PSA tape production
  • Product development of labels and self-adhesive films
  • Compliance testing for ASTM D6195, PSTC-16, va FINAT FTM 9

Loop Tack Testing and Pressure Sensitive Tape Loop Tack

Test Principle and Standards Overview

Loop tack testing involves forming a loop of PSA material with the adhesive facing outward. The loop contacts a standardized test surface—usually stainless steel yoki glass—and the force required to detach the loop is recorded. This force, expressed in Newtons per 10 mm yoki pounds per inch, reflects the tack strength of the adhesive.

StandartLoop LengthSurface AreaKey Notes
PSTC-16125 mm or 175 mm24 mm × 24 mmTwo test methods (tensile tester or loop tack tester)
ASTM D6195125 mm (Method B) or 175 mm (Method A)25 mm × 25 mmWidely used in U.S. testing labs
FINAT FTM 9175 mm25 mm × 25 mm (glass)Preferred in Europe for label adhesives

How to Perform the Loop Tack Test

1. Sample Preparation

  • Cut the specimen into 125 mm (for loop tack tester) yoki 175 mm (for tensile tester) lengths, 25 mm wide.
  • If testing unsupported adhesives, laminate them onto 2 mil PET film.
  • Condition the specimens at 23°C ± 2°C va 50% ± 5% RH for at least 24 hours.

2. Surface Cleaning

Clean test panels thoroughly using acetone, MEK, or ethanol-based solvents. Perform at least three cleaning cycles, using lint-free wipes.

3. Test Setup

For Loop Tack Tester (Method B):

  • Form the adhesive strip into a teardrop-shaped loop with adhesive facing outward.
  • Attach the loop ends using 12 mm masking tape.
  • Mount the loop on the upper jaw and bring it into contact with the test panel.
  • The tester automatically applies and separates the loop at 300 mm/min.

For Tensile Tester (Method A):

  • Use a vertical fixture that holds the stainless steel panel.
  • Form a loop using 24 mm × 175 mm strips.
  • Engage the crosshead to bring the loop into contact and then separate at 300 mm/min.

4. Measurement and Reporting

Record:

  • Maximum force (peak tack)
  • Failure mode (adhesive failure, cohesive failure, or adhesive transfer)
  • Environmental conditions
  • Backing type and coating weight

Use at least three replicates per sample and average the peak values.

Choosing the Right Loop Tack Tester

For laboratories seeking accuracy, repeatability, and compliance, the LTT-01 pastadirni tekshirgich by Hujayra asboblari offers an optimized solution. This device fully supports ASTM D6195 Method B, PSTC-16, va FINAT FTM 9 protocols. Key features include:

  • Precise force measurement with digital output
  • Automated cycling for improved repeatability
  • Quick-change sample fixtures for different tape types
  • Foydalanuvchi uchun qulay interfeys for R&D and quality control

Whether you’re a label manufacturer or a PSA developer, the LTT-01 streamlines your tack testing process and delivers standard-compliant results every time.

loop tack test method
LTT-01 pastadirni tekshirgich

Contact Us Get Loop Tack Testing Solution

The loop tack test method is essential for quantifying the instant bonding capability of pressure-sensitive adhesives. By following recognized standards like PSTC-16, ASTM D6195, va FINAT FTM 9, and utilizing precision equipment such as the Hujayra asboblari LTT-01, laboratories can ensure reliable, repeatable, va standard-compliant adhesive performance evaluations.

For organizations seeking customization, automation, or expert support, Hujayra asboblari offers full technical solutions tailored to your material testing needs across packaging, medical, pharmaceutical, and beyond.

uz_UZUZ
en_USEN es_ESES de_DEDE fr_FRFR it_ITIT arAR ko_KRKO jaJA ru_RURU pt_PTPT viVI id_IDID belBE bg_BGBG bs_BABS cs_CZCS da_DKDA elEL etET fiFI he_ILHE hi_INHI hrHR hu_HUHU kkKK lt_LTLT lvLV ml_INML my_MMMY nn_NONN nl_NLNL pl_PLPL ro_RORO sk_SKSK sr_RSSR sv_SESV ta_LKTA sl_SISL ukUK tr_TRTR sqSQ uz_UZUZ
Yuqoriga aylantiring

Bepul taklif va usulni olasizmi?

Quyidagi shaklni to'ldiring, biz tez orada bog'lanamiz.